Bolt-On A/C Hose Kits

Kwik Performance, Fair Grove, Missouri, offers its A/C Hose Technology, now with applications for 1973-87 Chevy C10 “Square Body” models. The bolt-on solution for C10 enthusiasts upgrading to modern Sanden compressors include professionally crimped hoses cut to the precise length for the specific engine bay layout of 1973-87 trucks. Prebent hardlines flow into the USA-made standard-barrier hose. Kits include hoses, accumulator/dryer, trinary safety switch, fixed orifice tube, PAG oil and extra O-rings.

Synthetic Motor Oil Line

AMSOIL, Superior, Wisconsin, presents an updated formulation of its top-tier Signature Series Synthetic Motor Oil line. Featuring premium base oils and a precision-engineered additive system, the synthetic oils help control wear and maintain viscosity even in extreme heat and high-pressure and cold-start operating conditions. They combat volatility, helping reduce oil consumption, and protect against low-speed pre-ignition (LSPI) that can damage pistons and other critical engine components in today’s turbocharged, direct-injection engines.

Return Hoses

Plews & Edelmann, Dixon, Illinois, presents its Edelmann Elite Return Hoses, a new high-performance product category for the hydraulic power steering aftermarket. The new line includes fully assembled return line assemblies with correct routing and fittings, ready to install with no cutting or hand fabrication required. Bulk coil is also offered, in 3/8-, 1/2- and 5/8-inch diameters. Each assembly includes original-style fittings, zinc-coated tubes and double-lock beading with barbed tube ends. An upgraded rubber formulation cuts oil-induced swelling by half.

Bronco/Jeep Calibrator

Superchips, Sanford, Florida, a Holley Performance Brand, presents an expansion of its Flashcal+ Handheld Calibrator platform, with new support for 2021-newer Ford Bronco and continuing support for Jeep JK, JL and JT models. The affordable, smartphone-based solution allows customization of vehicle settings, recalibrating for aftermarket modifications and unlocking vehicle-specific features directly from iOS or Android devices. Designed for on- and off-road enthusiasts, Flashcal+ connects through a OBD-II Bluetooth dongle and mobile app.

GM Programming Module

Range Technology, Odgen, Utah, a Holley Performance Brand, presents its new DFM Pro Module, the next evolution in Dynamic Fuel Management control for GM V-8 engine applications. The new DFM Pro introduces Bluetooth connectivity and smartphone integration for enhanced control and customization. Through an intuitive mobile app, drivers can monitor diagnostics, adjust throttle response and optimize vehicle performance directly from their smartphone. It disables Dynamic Fuel Management (DFM) and Auto Start/Stop.

Bypass Filtration System

Hot Shot’s Secret, Mt. Gilead, Ohio, presents its Pure Diamond Bypass Filtration System that delivers cleaner oil and extended engine life across a wide range of applications. The supplemental oil filtration system continuously removes solid contaminants such as wear metals, carbon and dirt from engine oil at a controlled rate. By filtering a portion of oil at a time through densely packed depth‑media filtration, it captures debris down to 2 microns and removes up to 96% of wear‑causing particles.

Fuel System & Ignition Upgrades

BluePrint Engines, Kearney, Nebraska, offers new Carburetor Inlet Extensions, Fuel Pressure Gauge Adapter Fittings and LS-Compatible Ignition Coils as additions to its performance lineup. Designed for builders seeking dependable solutions across a variety of engine applications, products simplify fuel routing, improve fuel pressure monitoring and deliver consistent ignition performance.

Wireless Throttle Response Controller

Pedal Commander, Thousand Oaks, California, presents Fn Tuned, a new, fully wireless throttle response controller. Available at fntuned.com and compatible with most modern drive-by-wire vehicles, regardless of fuel type or transmission, the device plugs directly into the accelerator pedal position sensor and modifies the factory throttle signal to eliminate drive-by-wire throttle lag. The result is a sharper pedal response, faster acceleration off the line and a driving experience that matches the vehicle’s capabilities.

Ford 5.0L Mustang GT Tuner Kit

Vortech Superchargers, Oxnard, California, presents an all-new S650 Mustang Supercharger Tuner Kit for 2024-26 Ford Mustang GT models. Created for aggressive power, proven reliability and race-level performance, the S650 system features an all-new bracket architecture, optimized inlet routing and precision accessory integration. The design maximizes belt control, airflow efficiency, system rigidity and OEM-level fitment under extreme performance conditions.

High Temperature Application Kit

ZyCoat, Olathe, Kansas, presents its ZyClear High Temperature Application Kits, now featuring new packaging. The advanced coating formula creates a high-performance, transparent coating engineered for extreme internal combustion engine environments where both thermal management and aesthetic preservation are critical. It creates a clear, high-gloss finish that withstands ambient temperatures exceeding 2,100 degrees and maintains integrity and appearance under prolonged thermal stress.

Camshafts for SBF Top-End Kits

Air Flow Research (AFR), Valencia, California, offers AFR Stage 1 and Stage 2 Small-Block Ford Camshafts, developed in partnership with Andrews Products to maximize performance of AFR 185cc Enforcer SBF cylinder heads. Dyno-tested and validated, the cams are a direct match for AFR Small-Block Ford Top-End Performance Kits, delivering a balanced blend of throttle response, drivability and street-ready power. Profiles are available for mild street applications to more aggressive performance builds.

Diesel Products

K&N Engineering, Riverside, California presents its expanded Performance Diesel Products Line. Improve towing power in modern Chevy, Ford and Ram diesel pickups with NextGen Air Intake Systems and Dryflow Replacement Air Filters, with no tune required. The intake systems include a redesigned filter, intake tube, airbox and fresh air inlet to provide horsepower gains with a sleek OEM style. Easy to install with Quick-Lock Technology, the air filters feature a precision-engineered tapered mounting bead interface to snap securely into the airbox.